-
Asked by Jd04/27/2020QHow much water does one packet of Imidacloprid 75 WSB require?A
Imidacloprid 75 WSB is typically mixed with 25-300 gallons of water, depending on your application per the product label. For smaller applications, you can use a similar product with the same active ingredient in a liquid form, such as Dominion 2L.
-
Asked by George from Rosharon, Tx09/25/2020QWhat is the correct dosage when applying Imidacloprid 75 WSB as a drench for citrus leaf miner?
It is my understanding that Imidacloprid 75 WSB can be mixed as a concentrated solution, approximately one 1.6 oz packet with 30 gallons of water and poured directly against the trunk to treat citrus miners.APer the Imidacloprid 75 WSB label, for trees and shrubs, you will use 1.6 oz. (1 packet) per 24 to 48 inches of cumulative trunk diameter. Uniformly apply the dosage in no less than 10 gallons of water per 1000 square feet as a drench around the base of the tree directed to the root zone. Remove p…
Read Full Answer »Per the Imidacloprid 75 WSB label, for trees and shrubs, you will use 1.6 oz. (1 packet) per 24 to 48 inches of cumulative trunk diameter. Uniformly apply the dosage in no less than 10 gallons of water per 1000 square feet as a drench around the base of the tree directed to the root zone. Remove plastic or any other barrier that will stop solution from reaching the root zone. Please see the label for complete application instructions. Be sure to apply this product only on fruit trees listed on the product label.