PRECAUTIONS

Keep out of reach of children. If more than an incidental amount is swallowed, seek medical attention immediately. Give one glass of water and do not induce vomiting.Wash hands well after use. If in eyes, remove contacts and flush with water for 15 minutes. Seek medical attention for any persistent irritation. If spray mist is inhaled, move to fresh air and seek medical attention if any respiratory difficulties persist. This is a pressurized aerosol can store away from ignition sources. Store between 35 and 95F.

DIRECTIONS FOR USE

Shake well before using. Press down on the actuator to dispense foam. Hot Spot+ may be dispensed with the can in any orientation.To coat scummy surfaces, hold the can about 12” away from the surface and apply foam in a sweeping motion.To inject into drains, cracks or crevices, carefully insert the included straw into the actuator. For deep injection into drains or hard to reach spots, use the 24” Hose Extension Actuator included in the case. Carefully remove the standard actuator from the can and press the Hose Extension Actuator onto the can and dispense as needed. Do not wipe up or wash off Hot Spot+ foam.The foam should be allowed to dissipate and should remain in contact with the organic debris for at least two hours to be most effective. Use in a well-ventilated area and avoid breathing spray mist. If the product contacts a direct food contact surface, rinse thoroughly before resuming food contact. Use bleach to kill spores if needed. Contact us for recommendations for other applications and see below for household cleaning uses.