There is no withdrawal period is specified on the Martins Permethrin 10% product label.
Yes, Martins Permethrin 10% can be applied top large animals such as horses. There is a dilution table on the product label for you to use. Martins Permethrin 10% is only labeled for larger dilution rates. Please contact Control Solutions 281-892-2500 to see what they would recommend breaking th dil…
Read Full Answer »Martins Permethrin 10% is effective once it's mixed with water, remember that water is the carrier that allows the product to be applied evenly. Just as with other insecticides, the product must be used within 24 hours of being diluted otherwise the effectiveness does decrease. According to the …
Read Full Answer »Martins Permethrin 10% can be applied every 3 weeks as needed.
Martins Permethrin 10% should mix clear with water.
Martins Permethrin 10% is to be mixed at 1 1/2 oz. in 1 quart of water for treating 400 linear feet with a 6-inch spray band. For other applications rates you can refer to the product label.
Mixed Martins Permethrin 10% solution can be disposed of by pouring it out right up against the foundation of your home or other structure.
Martin's Permethrin 10% is not labeled to be used in a fogger.
If you are looking for something to use in a thermal fogger to treat for various pests, such as mosquitoes, spiders, ants, etc., we would recommend using ULD BP-100. It is an oil based product that can be poured directly into the thermal…
Martins Permethrin 10% is not labeled to be used for head lice nor can it be used on the human body in any way or form. You should consult with a pharmacist or medical doctor for lice shampoo.
Yes, The Martins Permethrin 10% may be used indoors and outdoors for flea control, but you may need additional products with it. We also suggest you look at our Indoor/Outdoor Flea Kit for a continuous treatment.This kit contains both adulticides and Insect Growth Regulators (IGRs) to provide quick …
Read Full Answer »Martins Permethrin 10% is water-based.
Yes, you can apply Martins Permethrin 10% to the lawn. Thoroughly wet down grass a few hours before applying. Home lawns should be no taller than 3 inches at time of application. Slightly more water may be used as long as the amount of product per area is as listed below. For heavy infestations…
Read Full Answer »You will use 8 fl. oz. of Martins Permethrin 10% per 12.5 gallons of water for dipping for fleas.
Martins Permethrin 10% should not be applied to clothing as it is not labeled for this application.
Martin's Permethrin 10% cannot be applied to anything edible. You may be able to use something like Hi-Yield Indoor/Outdoor 10% Permethrin instead. Please consult the product label to make sure that the insect(s) you are targeting and the specific edibles you will be applying to are…
Read Full Answer »Martins Permethrin 10% is not labeled for usage on mattresses or bedding in any way. This is not a legal or a safe application and the product should not be applied to any other surface other than what is listed on the product label.
When using Martins Permethrin 10% can be used on dogs at the following usage rate: Dilute 8 ozs in 12.5 gallons of water; Thoroughly wet the animal by dipping, sponging, or spraying. Allow animal to dry in a warn place without rinsing or toweling. Do Not reapply product for two or three weeks. Co…
Read Full Answer »Martins Permethrin 10% cannot be reapplied in 2-3 weeks.
Martins Permethrin 10% is not labeled to be applied to indoor plants. You could use Talstar for indoor plants. Mix at .5oz per gallon water.
You can apply Martins Permethrin 10% on horses as a spray or spot treatment (not as a pour-on) for listed insects, per page 21 of the product label. You would dilute 8 oz. in 50 gallons of water, 16 oz. in 100 gallons of water, or 1 qt. in 200 gallons when used as a spray. For use as a spot treatmen…
Read Full Answer »