Spotrete F Fungicide

DIRECTIONS FOR USE:

For the control of select foliar diseases in non-residential turf and animal repellency on deciduous trees and shrubs (and non-bearing vines and orchards).

TURF APPLICATIONS

Not for use in residential turf, parks, athletic fields, or turf grown for sale or other commercial use such as sod.

Apply Spotrete F with properly calibrated mechanical or motorized spray equipment such as ground boom.

Golf Course Tees and Greens
The maximum winter application rate for turf is a single application of 16.3 lbs. ai/acre (3.64 gallons) or 0.374 lbs. ai/1000 sq. ft. (11.4 fl oz). The maximum summer application rate for turf is 3 applications of 10.2 lbs ai/acre (2.42 gallons) or 0.234 lbs. ai/1000 sq ft (7.1 fl oz). The maximum annual application rate is 47 lbs ai/acre (11.19 gallons) or 1.08 lbs ai/1000 sq ft (32.9 fl oz).

Pink and Gray Snow Mold: Spotrete F provides effective control of Snow Mold (Fusarium nivale and Typhula spp.) when combined with other snow mold products with enhanced longevity. This product can be mixed with Iprodione, Thiophanate-methyl, Propiconazole, Triadimefon, Chlorothalonil, PCNB, Myclobutanil, Azoxystrobin, and Mancozeb for use on listed crops and sites in accordance with the most restrictive of label limitation and precautions. No label dosage rates should be reduced or exceeded. This product cannot be mixed with any product containing a label prohibition against such mixing.
For additional information, refer to local state extension recommendations for tank mix combinations shown effective for your area.

DEER, RABBIT AND RODENT REPELLENCY on Deciduous and Evergreen Trees and Shrubs (and Non-Bearing Vines and Orchards Such as Grape Vines):

• Spotrete F cannot be used on crops that will bear fruit within one year of application.
• The maximum application rate for products applied as a mammal (deer) repellant is one quart of product in 3 - 7 gallons of water applied in an area of 1000 square feet.
• Applications to ornamentals will be restricted to the following 17 Northern States and allowed during the winter season only (October thru March): OH, PA, NY, MI, CT, MA, IN, IL, NJ, WV, MN, WI, VT, NH, RI, DE, and MD.
• DO NOT graze or feed cover crops from treated orchards. 

SPOTRETE F can be used to protect nursery stock, shrubs, ornamentals, non-bearing orchards and vines such as grape vines from rabbit, deer and rodent depredation. Non-bearing is defined as crops that will not bear fruit within one year of application. Spotrete F cannot be used on crops that will bear fruit within one year of application.
One application will protect treated parts from 1 to 3 months, depending upon weather conditions.

Deer Repellency: This product can be used as a repellent in deterring deer from moving into unwanted areas as a result of local feeding and browsing. The product is most effective when used in combination with mechanical deterrents such as ditches, fences, etc. Prepare and spray SPOTRETE F as indicated below depending upon season and type of application desired. Spray to a height of 5 feet (1.5 meters). Repeat applications may be necessary to protect new growth. The addition of a non-ionic surfactant prolongs the residual effectiveness of the treatment. Repellency is the result of rendering the treated plant parts distasteful. Some feeding may occur. As always, read and follow label directions for best results.

Spray Applications: Foliar Add 1 quart SPOTRETE F to 7 quarts of water and apply as a full coverage spray to all portions of the plant to be protected. Do not use wetting agents or surfactants as foliar damage may result. For best results spray when temperatures are greater than 40°F and relative humidity is less than 70 percent. For greater retention and residual efficacy, add a non-ionic surfactant into 1 gallon of SPOTRETE F prior to spraying.
Spray Application: Tree Trunks and Dormant Plants- Add 1 quart of SPOTRETE F to 3 quarts of water and apply as a spray to all portions of the plant to be protected. For greater retention and residual efficacy, add a non-ionic surfactant into 1 gallon of SPOTRETE F prior to spraying.
Brush On Application: Add SPOTRETE F undiluted with a paintbrush to stem parts and trunks to be protected. For greater retention and residual efficacy, add a non-ionic surfactant  into 1 gallon of SPOTRETE F prior to brushing.