List of kit contents for StealthNet Tool Kit:

• 1 x Carrying Case - Galvanized construction cable that is standard for perimeter support
• 1 x Magnetic Nut Setter (1/4 inches) - A heavy-duty scissor that is simply a must in any netting job
• 1 x Cable Cutters (Heavy Duty) - It offers the strongest and most discreet system in securing cable-end loop for a long lasting hold on turnbuckle or cable-end fastener.
• 1 x Net Ring Tool - The galvanized net rings helps hold the netting to the cable.
• 1 x Lag Screw Driver - For use with the M6 galvanized netbolts.
• 1 x SDS 4.8 mm Drill Bit Masonry - 1 x SDS 6.5mm Drill Bit Masonry - For use with both the 1-inch and 1.5-inch Split Pins as well as Anchor Rivets.
• 1 x Screw Eye Drive -  Used for cable runs under 25 feet.
• 2 x M6 Netbolt Galvanized - Corner/end attachment for an I-beam or other thick metal. 
• 2 x Screw Eyes Heavy Duty Galvanized - Turnbuckle for cable runs between 25 feet and 75 feet. 
• 2 x Turnbuckle Galvanized (Large) - May be used with galvanized cable that works best on dry and salt-free climates. Use 2 ferrules per cable loop attachment. 
• 10 x Multi-Use Cable Bracket - Used to fasten Bird Barrier brackers and clips to different metals. 
• 10 x Split Pin Stainless (1-inch) -  Low-Profile nylon Anchor provides a secure installation when drilling into stone, masonry, or brick. 
• 10 x Net Spike Galvanized -May be used for stone, concrete or solid brick. 
• 10 x Lag Screw Galvanized (Large) - It does not require a plastic anchor sleeve, the bent shaft holds it securely in place.