Key Features:

• Compact unit with smaller tank size
• Longer hose - 78 inches
• 17-inch wand
• Stainless steel flat sprat tip
• Angled end wand tip
• Comfortable grip handle with trigger
• Pressure relief valve
• Extra-wide stability base
• Includes tank collar with clips for vertical wand storage
• Natural tank color
• Product level fill markings in gallons and liters

Perfect to use with InVade Bio Foam and other foaming products.

HOW TO USE:

1. Remove all components from the packaging. Attach the extension wand to the trigger handle.
2. Securely hold the tank and unscrew the pump assembly (blue handle) from the tank.
3. For the best quality foam, do not fill the foamer to more than 1 gallon. Since air is required to make the foam as well as for pressurizing the foamer, the extra headspace is necessary.
4. Fill the foamer to the desired level with water, then add the InVade Bio Foam (1 oz per quart or 4 oz per gallon), or OutLAST Pro Foaming Agent followed by the chemical you are foaming, per label directions.
5. Swirl the foamer to mix, but do NOT shake.
6. Pressurize the tank by pumping up the unit to the desired pressure or until the pressure release valve begins to leak air.
7. Once the desired pressure has been achieved, push the pump handle down and twist it clockwise to lock it in place. You are now ready to start foaming.
8. While InVade Bio Foam and OutLAST Pro are not corrosive, it is a good idea to clean the foamer regularly with fresh water to extend its life.
9. If using other products in the foamer, make sure they are compatible with plastic parts.
10. Always depressurize the foamer using the green relief valve on the side (until the red part of the stem is visible) after use and prior to removing the pump. Beware of spray.
11. It is important to keep adequate pressure in the tank to maintain foam consistency.
12. It may be necessary to clean, and periodically replace the white foam insert in the nozzle to maintain foam quality after multiple uses.