DIRECTIONS FOR USE:

SPRAYING INSTRUCTIONS:

Spray Volumes: Apply in 10 to 240 gallons of water per acre (0.2 to 5.5 gallons of water per 1,000 sq. ft.)

Spot Spray with Hand Sprayers: Calibration and proper uniformed application are essential when using this product. Over application or rates above those specified including excessive overlaps of this product can cause injury. Calibrate sprayer to deliver 1 gallon of spray solution per 1,000 sq. ft. of treated area.

• Fescue Species - Mix 0.73 to 1.28 fl. oz. per gallon of water and treat 1,000 sq. ft. of turfgrass.
• Kentucky Bluegrass and Perennial Ryegrass - Mix 0.73 to 1.28 fl. oz. per gallon of water and treat 1,000 sq. ft. of turfgrass.

Lower Volume Equipment: Use as little as 10 gallons of water per acre. Use only application equipment that is capable of spreading a uniform droplet, wetting each seed surface.

KEY WEEDS CONTROLLED:

Alder, Aster, Bedstraw, Beggartick, Beggarweed, Bindweed, Black medic, Box elder, Carpetweed, Chickweed, Clover, Daisy fleabane, Dandelion, Deadnettle, Dock, Ground ivy, Hawkweed, Healall, Knotweed, Kochia, Lambsquarters, Lespedeza, Mallow, Marshelder, Morningglory, Oxalis, Pigweed, Plantain, Poison ivy, Poison oak, Pokeweed, Purslane, Ragweed, Shepherd’s-purse, Spurge, Thistle, Tumbleweed, Vetch, Virginia buttonweed, Virginia creeper, White mustard, Wild geranium, Wild violet, Wood sorrel, Yarrow.

ORNAMENTAL LAWNS AND TURF AND SOD FARMS:

Apply this product in 10 to 240 gallons of water per acre (0.2 to 5.5 gallons of water per 1,000 sq. ft.) to control weeds growing in Kentucky Bluegrass, Perennial Ryegrass, and fescue species (excluding golf course greens and tees).

Generally, the lower application rates will provide satisfactory control of sensitive weeds. the higher application rates will be required for dense infestations of perennial weeds, for adverse/extreme environmental conditions, or for weeds beyond the appropriate growth stages. For all application:

• do not overlap spray patterns
• use reduced rates if turfgrass is stresses from heat, drought, etc.

Note: During conditions which promote turf stress use lower rates. Turfgrass yellowing and bronzing may occur following application and will disappear after 7 to 14 days after application. Treated turfgrass will recover with new growth. Discolored leaf tissue will be removed with mowing. To reduce potential discoloration, avoid applications to turfgrass that is weakened by weather, mechanical, chemical, diseases or other related stress.

APPLICATION TIMING:

For best results, apply this herbicide in the late winter/early spring or early fall to young weeds that are actively growing. Follow-up applications may be required for dense infestations of perennial and biennial weeds.

Newly Seeded Areas: The application of this herbicide to grass seedlings is not recommended until after the second mowing. Do not apply to newly seeded areas until grass is well established unless discoloration or damage can be tolerated.

Newly Sodded, Sprigged or Plugged Areas: Do not apply to newly sodded, sprigged, or plugged grasses for at least 4 weeks after the sodding, sprigging, or plugging operations.

Seeding: Grass and broadleaf weeds germinate throughout the year. This herbicide will provide up to 4 weeks of residual weed control after application. This, reseed no sooner than 4 weeks after application of this product. When slit seeding, ensure good seed/soil contact and reseeding interval can be reduced to 21 days.

Mowing: For best results, turf should not be mowed for 1 day before or after application to maximize leaf surface and herbicide uptake and translocation.