Water pump system that provides continuous flow on power waterfalls, fountain heads and filtration systems.
Application
The unit is fully submersible and can be attached to fountain set and filters when used with the right adapter and tubing.
Warranty
Comes with a 3-year limited warranty for repair and replacement from the date of purchase. Warranty is valid if the unit fails to work because of defective material and workmanship.
DANGER - To avoid possible electric shock, special care should be taken since water is employed in the use of this equipment.
Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning, or if it is dropped or damaged in any manner.
Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before cleaning.
Grasp the plug and pull to disconnect; never yank the plug.
Do not allow the pump to become iced up.
Do not expose the pump to direct sunlight for a long period of time.
Make sure the pump is securely installed and stable before operating it.
CAUTION - This pump has been evaluated for fresh water only.
Do not use in salt water or highly chlorinated water.
This pump must not be used in swimming pools or areas where people are in contact with the water.
Do not use an appliance for other than its intended use.
Read and observe all the important notices on the appliance.
Do not allow children to handle this equipment.
This equipment should be kept away from children.
WARNING: This plug is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected to a grounding type receptacle.
Attaching Tubing to Pump Outlet:
Use the following method when only one water feature is being powered by pump.
1. For maximum flow attach the largest tubing fitting (included with the pump).
Water Garden Pump 325 GPH 1/2 in. ID or 3/4 in. ID
Water Garden Pump 1000 GPH 1 in. ID
Water Garden Pump 1900 GPH 1 1/4 in. ID
2. Loosely push hose clamp on tubing (clamp not included).
3. Push and twist tubing onto fitting.
4. For a more secure fit, use a stainless steel hose clamp.