TS Pro Micros Help - Questions and Answers

TS Pro Micros

Customer Q&A

TS Pro Micros

(6)

Free Shipping

Info / Buy Now

Ask Question

Asked by Jimc from Palm Coast, Florida

05/04/2019

Q

How should I apply TurfGrass Pro Micros to my lawn? Label says every 7-14 days, but for how long?
I have Saint Augustine grass. Analysis from University of Florida says my soil has high Ph(8.1) and lacks micronutrients. I don't mind giving my grass a good kick but a lifetime of application of micronutrients goes a bit far.

A

Normally an application of a liquid fertilizer with Micros like TurfGrass Pro Micros would be used throughout the growing season as needed for the lawn. If your pH is too high you may want to consider doing a heavy sulfur application to lower it to the desired level for your lawn first so that the l…
Read Full Answer »
Normally an application of a liquid fertilizer with Micros like TurfGrass Pro Micros would be used throughout the growing season as needed for the lawn. If your pH is too high you may want to consider doing a heavy sulfur application to lower it to the desired level for your lawn first so that the lawn can more easily and readily accept the nutrients you are putting down with the fertilizer. You can do it every 7-14 days while the lawn is needing a boost, and then periodically every few weeks or months as you see fit based on the appearance and growth of your lawn.

Was this answer helpful to you? Yes No

7 of 9 people found this answer helpful.
Asked by Matt from Pa

08/28/2019

Q

Should you spray TurfGrassPro Micros before aerating and overseeding?

A

You can apply TurfGrassPro Micros either before or after you seed but after aeration.

Was this answer helpful to you? Yes No

4 of 4 people found this answer helpful.
Asked by Nan from Savannah, Ga

07/04/2018

Q

How do I apply TurfGrassPro Micros to turfgrass? Can a hose-end sprayer be used?

A

TurfGrassPro Micros is best applied with a pump sprayer or backpack sprayer to get the most accurate application.

Was this answer helpful to you? Yes No

3 of 3 people found this answer helpful.
Asked by Steve

03/20/2018

Q

Can I run TurfGrassPro Micros t in a LT Rich Z Sprayer?

A

We do not see any reason why the TurfGrassPro Micros couldnt be used in a Z Sprayer unit. From our quick research on the Z Sprayers it appears they are designed for most professional lawn chemicals and use and would work for your needs.

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by Doyle

04/22/2020

Q

Do I water in or allow TurfGrassPro Micros to dry on grass?
Do I water in the product or is it absorbed through the grass leaves.

A

TurfGrassPro Micros does not require watering in after application and you want to avoid watering or rain for at least 24 hours after application. Just be sure to use sufficient water to cover the area during application. If you need assistance with calibrating your sprayer we have a video here…
Read Full Answer »
TurfGrassPro Micros does not require watering in after application and you want to avoid watering or rain for at least 24 hours after application. Just be sure to use sufficient water to cover the area during application. If you need assistance with calibrating your sprayer we have a video here that can help.

Was this answer helpful to you? Yes No

2 of 3 people found this answer helpful.
Asked by Scott from Weare, Nh

07/29/2021

Q

Application amount using TS Pro Micros
Hi, the label states 2 ozs per 1000sq ft, but is that mixed with water? How much water per oz's application is required.

A

Yes, you should dilute the TurfGrassPro Micros with water before application. We recommend using 2-5 gallons of water per 1000 sq ft with this and other liquid fertilizers for best results.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Ken from Virginia Beach

04/23/2018

Q

Can TurfGrass Pro Micros be mixed with HydraHume T&O?

A

You could potentially mix and spray TurfGrass Pro Micros and Hydra-Hume at the same time. We would recommend a small jar test for compatability before mixing a large tank for the first time. You could also use MicroMerge, which is basically HydraHume impregnated with micronutrients all in one produc…
Read Full Answer »
You could potentially mix and spray TurfGrass Pro Micros and Hydra-Hume at the same time. We would recommend a small jar test for compatability before mixing a large tank for the first time. You could also use MicroMerge, which is basically HydraHume impregnated with micronutrients all in one product.

Was this answer helpful to you? Yes No
Asked by R

07/10/2019

Q

Can you mix TurfGrassPro Micros with an NPK fertilizer?
Spraying with fine nozzle

A

TurfGrassPro Micros only contains the micros so is intended to be used as a supplement to NPK fertilizers. You can use together following all instructions on the labels. We would recommend a small jar test for compatability before mixing a large tank for the first time

Was this answer helpful to you? Yes No

0 of 1 people found this answer helpful.
Asked by Sam from Mason, Ohio

04/26/2021

Q

How much water is needed to mix with TurfGrassPro Micros to treat 3,000 sq ft?

A

The water volume you use when applying the TurfGrass Pro Micros, or any other product that gives you an amount per 1000 sq/ft on the product label, will vary from person to person and application to application. The water is merely the carrier to get the amount of chemical evenly distributed over th…
Read Full Answer »
The water volume you use when applying the TurfGrass Pro Micros, or any other product that gives you an amount per 1000 sq/ft on the product label, will vary from person to person and application to application. The water is merely the carrier to get the amount of chemical evenly distributed over the desired amount of treatment area. For fertilizers you want to use a higher water volume per 1000 sq/ft than you would an insecticide or even herbicide, as you want to make sure the nutrients are getting not just on the foliage of the grass, but also down into the roots and thatch layers of the soil. The higher water volume also insures you do not over apply and burn the lawn from too high of a concentration of fertilizer in one spot. On average you will use 2-4 gallons of water to every 1000 sq/ft you treat. So based on the mix rate you choose, anywhere from 2-6 oz of TGP Micros per 1000 sq/ft ( so 6-18 oz to your whole 3000 sq/ft area), would be put in roughly 2 gallons of water per 1000, or 6-10 gallons over the whole yard.

Was this answer helpful to you? Yes No
Asked by Matt from Ottawa

05/19/2021

Q

Can TurfGrassPro Micros be tank mixed with CoRoN 18-3-6 & Tenacity to treat a Kentucky Bluegrass/Tall Fescue lawn?

A

The best way to determine if you an tank mix CoRoN 18-3-6 Plus 0.5? with TurfGrass Pro Micros and Tenacity Herbicide is to do a jar test to make sure they are compatible, if they are just follow each label for mixing instructions and follow the most restrictive label.

Was this answer helpful to you? Yes No
Asked by Nick from Indiana

05/19/2021

Q

Can TurfGrassPro Micros be tank mixed with a 3 Way Herbicide?

A

Yes, as long as you do a tank mix test first for compatibility, you can mix the TurfGrassPro Micros with the 3 Way Max Herbicide to apply at the same time.

Was this answer helpful to you? Yes No
Asked by Scott from Alexandria, Va

06/29/2021

Q

Can I mix TurfGrassPro Micros with Turfgrass pro 0-0-29?

A

There should be no issue mixing the TurfGrassPro Micros with TurfGrassPro 0-0-29

Was this answer helpful to you? Yes No
Asked by Benjamin from Elgin, Sc

11/11/2021

Q

Can I apply TS Pro Micros as a foliar application?

A

TurfGrassPro Micros is absorbed by both foliar and root, so you can apply it as a foliar application. Please review the full product label for more information.

Was this answer helpful to you? Yes No
Asked by Doug from Myrtle Beach, Sc

06/07/2022

Q

Is TS Pro Micros safe to use with centipede grass? If so, what would be the application rate and time of day to use it?

A

TS Pro Micros is safe for centipedegrass at the application rate of 2 to 6 fl oz per 1000 sq. ft depending on the nutrient needs of your lawn. It is best to apply any lawn product between 65-85 degrees to ensure no turf damage.

Was this answer helpful to you? Yes No
Asked by Matt from Willis, Texas

09/05/2022

Q

How long after applying TS Pro Micros before pets / children can return to the lawn areas?

A

After an application of TurfGrassPro Micros it is safe for people and pets to return to the area once dry, typically after 4-6 hours.

Was this answer helpful to you? Yes No