Answer:

We apologize, but we don't have the exact spreader setting for your model spreader. The easiest way to determine the correct setting for you needs is outlined below:

If you need to use 3lbs of product per 1,000 sq ft you would add 3 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft).  If you have product left, your setting is too low.  If you run out of product, your setting is too high

Please refer to the product label for Dylox 6.2 Granules for complete instructions on rates to use for the pest you are treating for.  Scott's also has a setting tool on their website that might be helpful.

Answer last updated on: 02/22/2017