CoRoN 18-3-6 Plus 0.5% Help - Questions and Answers

CoRoN 18-3-6 Plus 0.5%

Customer Q&A

CoRoN 18-3-6 Plus 0.5%

(27)

Free Shipping

Info / Buy Now

Ask Question

Asked by Stan from Raymond, Ms

09/14/2011

Q

How many oz. of CoRoN 18-3-6 Plus 0.5% Fe per gallon of water?

A

Generally speaking you would typically apply 22 ounces or so of CoRoN 18-3-6 Plus 0.5% Fe in 2-5 gallons of water per 1000 square feet. The specific amount of product is going to vary based on the type of grass you are treating, but generally 22 ounces per 1000 square feet is the average ap…
Read Full Answer »
Generally speaking you would typically apply 22 ounces or so of CoRoN 18-3-6 Plus 0.5% Fe in 2-5 gallons of water per 1000 square feet. The specific amount of product is going to vary based on the type of grass you are treating, but generally 22 ounces per 1000 square feet is the average application. Please read the CoRoN 18-3-6 Plus 0.5% Fe product label for more specific application rates.

Was this answer helpful to you? Yes No

63 of 83 people found this answer helpful.
Asked by Dick

04/26/2011

Q

How many square feet does 2.5 gallons of CoRon cover?

A

Generally speaking you would typically apply 22 ounces or so per 1000 square feet. The specific amount is going to vary based on the type of grass you are treating, but generally 22 ounces per 1000 square feet is the average application. So, the 2.5 gallon container is 320 ounces, which …
Read Full Answer »
Generally speaking you would typically apply 22 ounces or so per 1000 square feet. The specific amount is going to vary based on the type of grass you are treating, but generally 22 ounces per 1000 square feet is the average application. So, the 2.5 gallon container is 320 ounces, which will potentially treat about 14,500 square feet.

Was this answer helpful to you? Yes No

62 of 68 people found this answer helpful.
Asked by Tom from Du Quoin Il

06/02/2013

Q

Can CoRoN be applied before a rain and still be effective?
I applied CoRoN about 4hrs. Before a 4"rain and am concerned about it effectiveness.

A

CoRon actually has a built in "wash off resistance" As long as it had time to completely dry it should not wear off.

Was this answer helpful to you? Yes No

44 of 44 people found this answer helpful.
Asked by Sheri from Escondido, Ca

09/08/2014

Q

I see that this product is extended release. How long does it continue to provide nutrients?

A

According to the manufacturer, Coron 18-3-6 will last for up to 30 days in the soil. The longevity of Coron 18-3-6 will also depend on the rainfall and soil type in your area. The iron will remain in the soil until the plants utilitze it or if it gets washed away. Please let us know if you have any …
Read Full Answer »
According to the manufacturer, Coron 18-3-6 will last for up to 30 days in the soil. The longevity of Coron 18-3-6 will also depend on the rainfall and soil type in your area. The iron will remain in the soil until the plants utilitze it or if it gets washed away. Please let us know if you have any additional questions.

Was this answer helpful to you? Yes No

28 of 29 people found this answer helpful.
Asked by Ray from Wake Forest

07/26/2016

Q

At what temperature can Coron 18-3-6 Plus 0.5% Fe be applied?

A

Coron 18-3-6 Plus 0.5% Fe should not be used in temperatures above 80 degrees Fahrenheit and below 50 degrees Fahrenheit. Be sure to apply in the early morning or late evening hours to avoid the heat of the day in the summer months.

Was this answer helpful to you? Yes No

20 of 21 people found this answer helpful.
Asked by Larry from Centre Al

03/15/2014

Q

What size package does the CoRoN 18-3-6 Plus 0.5% Fe come in?

A

CoRoN 18-3-6 Plus 0.5% Fe is sold in 2.5 gal jugs. Plus, we offer fast free shipping as well.

Was this answer helpful to you? Yes No

18 of 19 people found this answer helpful.
Asked by Jeff from Lynden

04/13/2018

Q

How often should CoRoN 18-3-6 Plus 0.5% Fe be applied?
How often should this be applied to your grass?

A

CoRoN 18-3-6 Plus 0.5% Fe can be applied at any time as long as the turf is not dormant. The healthiest, hardiest lawns are fertilized 4 times per year - in the fall, summer, early spring, and late spring, using fertilizers dependent upon what nutrients your lawn needs throughout the year.

Was this answer helpful to you? Yes No

14 of 15 people found this answer helpful.
Asked by James from Maryland

04/25/2018

Q

If I mix CoRoN 18-3-6 Plus 0.5% Fe and Drive XLR8 together, should I still use a surfactant?

A

Yes, a surfactant such as Duo Stick would be recommended to use when applying a mixed solution of CoRoN 18-3-6 Plus 0.5% Fe and Drive XLR8 to increase the effectiveness of the active ingredient quinclorac in Drive XLR8.

Was this answer helpful to you? Yes No

13 of 14 people found this answer helpful.
Asked by John from Florida

07/10/2015

Q

Will CoRon 18-3-6 Plus 0.5% Fe over spray of this product discolor a concrete driveway?

A

Yes, the CoRon 18-3-6 Plus 0.5% Fe will stain the concrete if sprayed on it. The dye in the product will stain any porous surface.

Was this answer helpful to you? Yes No

10 of 12 people found this answer helpful.
Asked by Aaron from Central Minnesota

05/06/2018

Q

What is the expected shelf life of CoRoN 18-3-6 Plus 0.5% Fe?

A

CoRoN 18-3-6 Plus 0.5% Fe if stored in a cool dry area without freezing will last for approx. 2 years.

Was this answer helpful to you? Yes No

9 of 10 people found this answer helpful.
Asked by Corey from Missoula Mt

03/19/2015

Q

Can I tank mix CoRoN 18-3-6 Fe with DOW Dimension herbicide?

A

Yes, Coron and Dimension 2EW can be mixed. We would recommend mixing a small amount first in order to ensure there is no clumping.

Was this answer helpful to you? Yes No

9 of 9 people found this answer helpful.
Asked by Scott from Hartland, Wi

03/31/2013

Q

Is CoRoN compatible to mix with Talstar P for use in a trailer sprayer?

A

Yes, you can tank mix Coron with Talstar P for use in a trailer sprayer.

Was this answer helpful to you? Yes No

8 of 10 people found this answer helpful.
Asked by Richard from Jacksonville, Fl

06/18/2018

Q

Does CoRoN 18-3-6 Plus 0.5% Fe burn St Augustine grass if applied in extreme temperatures? 85 to 95 degrees

A

CoRoN 18-3-6 Plus 0.5% Fe can burn if too much is applied or if applied to heat/drought stressed lawns.  It should not be used in temperatures above 80 degrees Fahrenheit and below 50 degrees Fahrenheit. Be sure to apply in the early morning or late evening hours to avoid the heat of the day in …
Read Full Answer »
CoRoN 18-3-6 Plus 0.5% Fe can burn if too much is applied or if applied to heat/drought stressed lawns.  It should not be used in temperatures above 80 degrees Fahrenheit and below 50 degrees Fahrenheit. Be sure to apply in the early morning or late evening hours to avoid the heat of the day in the summer months.

Was this answer helpful to you?   Yes No

7 of 7 people found this answer helpful.
Asked by David from Kokomo, In

10/14/2015

Q

When is the best time and the worst time of the year to apply CoRoN 18-3-6 Plus 0.5% Fe?

A

Usually, a fertillizer such as CoRoN 18-3-6 Plus 0.5% Fe can be applied at any time as long as the turf is not dormant.

Was this answer helpful to you? Yes No

6 of 6 people found this answer helpful.
Asked by Derrick from Capitol Heights, Maryland

05/27/2018

Q

What is the mixture ounces of CoRon 18-3-6 in a 2 gallon tank to treat 200 square feet of tall fescue?
Label states pounds of CoRon, Need to know ounces amounts.

A

Per the CoRoN 18-3-6 Plus 0.5% Fe product label: For cool season grasses you should be using 3.75-4.25 lbs of nitrogen per 1000 sq/ft per year. Many customers break down their fertilizer applications into 6-8 applications per year throughout the growing season. If we go with 6 times a year and a de…
Read Full Answer »
Per the CoRoN 18-3-6 Plus 0.5% Fe product label: For cool season grasses you should be using 3.75-4.25 lbs of nitrogen per 1000 sq/ft per year. Many customers break down their fertilizer applications into 6-8 applications per year throughout the growing season. If we go with 6 times a year and a desired rate of 4 lbs of nitrogen per 1000 sq/ft per year, you would be looking at roughly 45 oz per 1000 sq/ft per each of the 6 applications. If you only have 200 sq/ft of lawn to treat then you would only need roughly 9 oz to that area in likely ½ -¾ gallon of water at most. You typically use 1-2 gallons of water per 1000 sq/ft, so since your area is much smaller than that you should not be using that high of a water volume.

Was this answer helpful to you? Yes No

6 of 9 people found this answer helpful.
Asked by Aaron from Central Minnesota

05/06/2018

Q

Can CoRon 18-3-6 Plus .5 Fe be mixed with Prodiamine 65 WDG (Generic Barricade)?

A

CoRoN 18-3-6 Plus 0.5% Fe can be mixed with Prodiamine 65 WDG and applied at the same time as long as they stay mixed in the tank.

Was this answer helpful to you? Yes No

5 of 5 people found this answer helpful.
Asked by Ali from Joliet, Il

04/26/2016

Q

Will CoRoN work with Gordons Trimec Classic Broadleaf Herbicide and Cy-Kick CS?
I am in Chicago area and want to use this for fertilizer, along with weed and pest control in one application.

A

CoRoN is compatible with most fungicides, herbicides and insecticides so should be ok to mix with Trimec Classic and Cy-Kick CS. Be sure to follow each product labels instructions for rates and coverage area and further instructions regarding tank mixing.

Was this answer helpful to you? Yes No

5 of 5 people found this answer helpful.
Asked by Derek from Bentonville, Ar

02/28/2018

Q

Should I apply CoRoN 18-3-6 Plus 0.5% Fe after rain?
Is it a good idea to apply after a good rain? The ground is wet so I would imagine it would soak in well.

A

CoRoN 18-3-6 Plus 0.5% Fe could be applied after a rain as long as the ground is no soaked. You will still need to use a sufficient amount of water with CoRoN 18-3-6 Plus 0.5% Fe to cover the area being treated.

Was this answer helpful to you? Yes No

4 of 5 people found this answer helpful.
Asked by L from Alvord, Texas

03/24/2016

Q

Do I need to water CoRoN 18-3-6 Plus 0.5% Fe after applying?

A

CoRoN 18-3-6 Plus 0.5% Fe Should be applied until run off. There is no reason to water in after application is complete.

Was this answer helpful to you? Yes No

3 of 3 people found this answer helpful.
Asked by Ilija from Muskego

10/05/2013

Q

How Much CoRoN for Kentucky Bluegrass?
How many oz of CoRoN do i need per 1000sqft of CoRoN? I dont understand the pounds per 1000sqft.

A

Generally speaking you would typically apply 22 ounces or so of CoRoN 18-3-6 Plus 0.5% Fe in 2-5 gallons of water per 1000 square feet. The specific amount of product is going to vary based on the type of grass you are treating, but generally 22 ounces per 1000 square feet is the averag…
Read Full Answer »
Generally speaking you would typically apply 22 ounces or so of CoRoN 18-3-6 Plus 0.5% Fe in 2-5 gallons of water per 1000 square feet. The specific amount of product is going to vary based on the type of grass you are treating, but generally 22 ounces per 1000 square feet is the average application. Please read the CoRoN 18-3-6 Plus 0.5% Fe product label for more specific application rates. Generally speaking you would typically apply 22 ounces or so of CoRoN 18-3-6 Plus 0.5% Fe in 2-5 gallons of water per 1000 square feet. The specific amount of product is going to vary based on the type of grass you are treating, but generally 22 ounces per 1000 square feet is the average application. Please read the CoRoN 18-3-6 Plus 0.5% Fe product label for more specific application rates. - See more at: http://www.domyownpestcontrol.com/coron-1836-plus-05-fe-p-1788.html#sthash.ldSIDhR5.dpuf

Was this answer helpful to you? Yes No

3 of 6 people found this answer helpful.