For treating yards, it is more a measurement of how many ounces per area than ounces per gallon. For treating a yard, you should apply 1 ounce of Cyper TC per 1000 square feet. It does not matter if the 1 ounce you are applying is in 1 gallon of water, or 10 gallons of water, it's really…
Read Full Answer »Typically, termiticides like the Cyper TC, have very low solubility in water and they are unlikely to leach out of the treated soil when rainfall or irrigation later contacts said soil. The molecules of the active ingredient tend to bind tightly to the soil particles, and unless the soil itself move…
Read Full Answer »We do have a liquid formulation of cypermethrin called Cyper TC that should fit your needs very well. Since this is an emulsifiable concentrate, it may cause staining to old vinyl siding so you may want to test a small area if this is an issue for you. If staining is a problem then you could use wat…
Read Full Answer »Actually the Cyper TC product label has specific guidelines on how to safely treat termites on properties that have wells. You can find this information starting on page 8 of the product label. Cyper TC is not labeled for use indoors for general pest control and should not be used for this purpose. …
Read Full Answer »It is recommended that you keep pets out of the area that is being treated with Cyper TC until it dries completely. Once it has dried, it is safe for them to return to the area. This is generally between 1-2 hours.
For most general pest control applications, you will use 0.5 fl oz of Cyper TC per gallon of water. Please refer to the product label for your specific pest treatment rates.
Cyper TC is labeled for ant control outdoors but it will only kill the ants that actually cross over the treated surface, it will not kill the colony. Termidor SC is the preferred product for outdoor ant control on buildings because unlike most sprays that kill the ants right away, Termidor has a de…
Read Full Answer »Cyper TC is labeled for fire ants and will do a good job if you follow the product label. According to the product label, you should apply 1-2 gallons of diluted solution to each mound and treat in the 4 ft diameter immediately around each mound very early in the morning or late in the evening (do n…
Read Full Answer »Cyper TC should be applied on a dry day when there will not be any expected rainfall. Please check your weather forecast prior to application.
The manufacturer, Control Solutions, is aware of this discrepancy. The label actually does mean .1% emulsion even though they do not mention this dilution rate on the dilution table. To make a .1% emulsion of Cyper TC you will need to use .51 oz of Cyper TC plus enough water to make 1 gallon of fini…
Read Full Answer »For most general pest control applications, you will use 0.51 fl. oz. of Cyper TC per gallon of water. For 20 gallons of water, you will use 10.2 fl. oz.
The odor from Cyper TC should go away after the product has dried and you have vented the structure by opening doors and windows. If you still feel you can smell the product you can try using a deodorizer such as Odor Hunter or Bac A Zap to help remove the odor.
Cyper TC is labeled for ant around the outside perimter of a structure and it will kill ants that come into direct contact with the treated surface. Cyper TC will not kill the ants that are back at the nest (For this type of effect we recommend Termidor SC). According to the Cyper TC product label: …
Read Full Answer »According to the Cyper TC label: Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area. Rinsing application equipment over the treated area will help avoid run off to water b…
Read Full Answer »Cyper TC is not labeled to be applied in a pasture. We would not recommend applying this product in a pasture.
Yes, Cyper TC can be applied with a hose end sprayer.
Cyper TC is safe to use in a crawl space. This product should be used around piers and beams.
We cannot be certain of how much and where exactly it was treated and the distance of the well. We recommend that you contact the pest control company and manufacturer (Control Solutions 800-281-2500) for information on the treatment applied to your home.