Hi-Yield Atrazine Weed Killer can be applied on established Centipede lawns for weed control or in dormant or growing seasons.
Hi-Yield Atrazine Weed Killer is not labeled for torpedo grass. Torpedo grass is hard to treat. We are not aware of a product that will treat Torpedo and not also harm your lawn. You may want to consider spot treating with RoundUp.
Hi-Yield Atrazine Weed Killer is safe for pets as long as they are not in the area during application. They are safe to re-enter after the product has had time to dry. We usually recommend at least 2 hours of drying time.
Hi-Yield Atrazine Weed Killer is not labeled to treat Torpedo grass. Torpedo Grass is hard to treat. We are not aware of a product that will treat Torpedo and not harm St. Augustine. You may want to consider spot treating with RoundUp.
Hi-Yield Atrazine Weed Killer is safe to apply to centipede grass to get rid of spurge.
You will want to give at least several hours of dry time for the Hi Yield Atrazine to adequately absorb into the plants before you drive on it or apply another product.
Hi-Yield Atrazine Weed Killer could damage or kill crepe myrtles. It should not be used over rooting area of trees, ornamentals, vegetables or other desirable plants other than indicated established turfgrasses.
Hi-Yield Atrazine Weed Killer is not labeled for use on edibles. This product is only labeled for use on St. Augustine and Centipede grass.
Per the Hi Yield Atrazine Weed Killer Product Label: Rain or water within 2 or 3 days of application may decrease the effectiveness on emerged weeds. However, for the control of weeds from seeds, rainfall or watering is necessary within 7 to 10 days after treatment
No, Hi-Yield Atrazine Weed Killer is to be mixed with water only. Combinations with other chemicals in the application mixture are not recommended.
Herbicides and insecticides should not be mixed. It is recommended to apply Hi-Yield Atrazine Weed Killer and then apply an insecticide separately.
Hi-Yield Atrazine Weed Killer is not labeled for use on Bermuda grass, so we would not recommend this application. We do offer other products such as Speedzone that would work for broadleaf control on Bermuda turf.
Hi-Yield Atrazine Weed Killer is not labeled for creeping indigo. It is not a pre-emergent so it would not prevent any weeds from emerging.
Hi-Yield Atrazine Weed Killer could harm shrubs or bushes. We recommend to not apply the Atrazine around the bushes/shrubs. Gordons Ornamec would be a better choice.
Generally something like Hi-Yield Atrazine Weed Killer or Image Kills Nutsedge are good options for St Augustine turf. It really depends on the target weeds you need to treat.
The mixing rate for Hi-Yield Atrazine Weed Killer is 4.4 fl oz per gallon of water. Please review the product label for further application instructions.
We apoogize your question seems incomplete. Please call us at 866-581-7378 so that we can better assist you.
Hi-Yield Atrazine Weed Killer is not labeled to be used around corn. We are not as familiar with products that are safe to be used in agricultural areas as we are new to that side of products. We recommend contacting your local department of agriculture to get recommendations that local farmers u…
Read Full Answer »Hi-Yield Atrazine is not labeled to be used on any type of edibles. It is only labeled to be used on St. Augustine and Centipede grasses.
Hi-Yield Atrazine Weed Killer is not labeled to be used areound cattle, so we cannot say it is safe. Martins Clear Pasture is labeled to be used in pastures.