Diseases Controlled:

Actinopelte leaf spot, Algal scum, Alternaria leaf spot or leaf blight, Anthracnose, Anthracnose Blights, Black spot (Diplocarpon), Botrytis blights, Botrytis flower spot, flower blight, Brown blight, Brown patch, Cephalosporium leafspot, Cercospora leafspot, Cerosporidium leafspot, Copper spot, Corynespora stem and leaf spots, Curvularia flower spot, Curvularia leafspot, Cylindrocladium stem canker, Dactylaria leafspot, Dichondra leaf spot, Didymellina leafspot, Dollar spot, Drechslera (Bipolaris) leafspots, Erysiphe cichoracearum (powdery mildew) Microsphaera spp., Fabraea (Entomosporium) leafspot, Fusarium (Gibberella) leafspot, Fusarium (Microdochium) Patch, Gloeosporium black leafspot, Gray Snow Mold, Gray leaf spot, Gymnosporangium spp. (rust) Puccinia spp., Inkspot, Leaf spot, Marssonina leafspot, Melting Out, Monilinia blossom blight, Mycosphaerella ray blight, Myrothecium leafspot, brown rot, Ovulinia flower blight, Phyllosticta leafspot, Phytophthora leaf blight, dieback, Pucciniastrum hydrangeae (rust) Puccinia spp., Ramularia leafspot, Red thread, Rhizoctonia web blight, Rhizopus blossom blight, Scab (Venturia), Sclerotinia flower blight, Septoria leafspot, Shothole (Stigmina), Sphaeropsis leafspot, Sphaerotheca fuliginea (powdery mildew) Microsphaera spp., Stagonospora leaf scorch, Stem rust (bluegrass), Tan leafspot (Curvularia), Taphrina blister, Twig blight, Volutella leaf blight

Application Rates:

• Tree crops: 1.5 - 5.5 pints/acre
• Sodfarm grass: 5.5 - 15.0 pints/acre
• Golf course fairways: 5.5 - 15.0 pints/acre
• Golf course tees and greens: 2.0 - 5.5 fl oz/1000 sq ft.

General Precautions and Restrictions

Do not apply this product within 150 feet (for aerial and air-blast application); or 25 feet (for ground applications) from marine/estuarine water bodies unless there is an untreated buffer area of that width between the area to be treated and the water body.

Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-and-weather related factors determine the potential for spray drift. The applicator and the grower are responsible for considering all these factors when making decisions. The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agricultural field crops. These requirements do not apply to forestry applications, public health uses or to applications using dry formulations.

1. The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor.
2. Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45 degrees.

Mixing, Loading, and Applying

Chlorothalonil 720 Select is intended to be diluted into water, then applied to crops by typical agricultural spraying techniques.

ALWAYS APPLY THIS PRODUCT IN SUFFICIENT WATER TO OBTAIN THOROUGH, UNIFORM COVERAGE OF FOLIAGE AND CROP SURFACES INTENDED TO BE PROTECTED FROM DISEASE

Spray volume to be used will vary with crop and amount of plant growth. Spray volume should normally range from 20 to 150 gallons per acre (200 to 1400 liters per hectare) for dilute sprays and 5 to 10 gallons per acre (50 to 100 liters per hectare) for concentrate ground sprays and aircraft applications. Both ground and aircraft methods of application are recommended unless specific directions are given for a crop.

Slowly invert container several times to assure uniform mixture. Measure the required amount of Chlorothalonil 720 Select and pour into the spray tank during filling. Keep agitator running when filling spray tank and during spray operations.

Do not use on greenhouse-grown crops except as directed in the Ornamental Plants section of this label.

Tank Mixing

When tank mixing this product with other pesticides, observe the more restrictive label limitations and precautions. No label dosage rates should be exceeded. This product cannot be mixed with any product containing a label prohibition against such mixing.

Chlorothalonil 720 Select can be tank mixed with ActinoGrow (Streptomyces lydicusWYEC 108) for the control of diseases in soybeans as specified on both this and the Actino-Grow label (see the Application Rate Table for details). Observe all applicable directions,precautions, and limitations on the Chlorothalonil 720 Select and ActinoGrow label (EPA Reg. No. 73314-1) when applying these products. Do not combine Chlorothalonil 720 Select in a sprayer tank with pesticides, surfactants or fertilizers, unless your prior use has shown the combination physically compatible, effective and noninjurious under your conditions of use. Do not combine this product with Dipel 4F, Foil, Triton AG-98, Triton B-1956 or Latron B-1956, as phytotoxicity may result from the combination when applied to the crops on this label. DO NOT tank mix this product with oil, or with any adjuvants which contain oil as their principal ingredient. When an adjuvant is to be used with this product, Prime Source LLC recommends the use of a Chemical Producers and Distributors Association (CPDA) certified adjuvant. Do not use with Copper-Count N in concentrated spray suspensions.

Applications Through Sprinkler Irrigation Systems (Chemigation)

Application through sprinkler irrigation systems is recommended only for those specific crops for which the notation “chemigation OK” is listed on label.

Refer to Product Label for complete list of target diseases, specific directions for use and additional precautionary statements.