-
Asked by Stephen from Toms River, Nj05/18/2019QOn average, how long does it take for visible results with 2DQ Herbicide?A
2DQ Herbicide may take up to 6 weeks to completely kill target weeds depending on what you are treating. You should start to see effects within 1-2 weeks though.
-
Asked by Kim from Lincoln, Ne08/17/2016QWhat is the dilution rate for 15 gallons of water using 2DQ Herbicide?
I don't see a dilution rate for smaller quantities of this. How much would be used to make 15 gallons of product?AThe rate for 2DQ Herbicide is dependant on the type of turf you are applying to and is not per gallon of water but is per 1000 sq ft. For cool season grasses, use 0.75 - 1.1 ounces of product to 1-5 gallons of water per 1000 square feet. For warm season grasses, use 0.37-0.55 ounces of product t…
Read Full Answer »The rate for 2DQ Herbicide is dependant on the type of turf you are applying to and is not per gallon of water but is per 1000 sq ft. For cool season grasses, use 0.75 - 1.1 ounces of product to 1-5 gallons of water per 1000 square feet. For warm season grasses, use 0.37-0.55 ounces of product to 1-5 gallons of water per 1000 square feet.  The amount of water used to apply 2DQ herbicide is not critical, but should be sufficient for uniform coverage of the target area. Calibrate by determining the volume of water required to treat 1,000 square feet. Use this calibration volume to determine the amount of water and Dimension herbicide needed to treat the target area (see the following calibration example). Note: Sprayer calibration (volume of spray needed to treat 1,000 square feet) will vary with each individual operator.
Steps in Calibration:
1. Mark an area of 1,000 square feet (i.e. 20 by 50 feet or 25 by 40 feet).
2. Place the sprayer on a level surface and add water noting the final level of water in the spray tank.
3. Spray the marked area with a sufficient volume of water to provide uniform coverage. Refill the sprayer to the same level as before measuring the amount of water added. The measured water added to the sprayer is the volume needed to cover 1,000 square feet.
4. Determine the application rate from the Recommendations section of the label.
5. To each volume of water used as measured in step 3, add the amount of herbicide as determined in step 4. -
Asked by Brad from Vero Beach, Fl08/03/2016QCan 2DQ Herbicide be used on Florida lawns?A
2DQ Herbicide can be used on dormant centipede and St. Augustine grass, which are the most common grass types in FL. This can also be used on bahia, bermuda, and zoysiagrass. Be sure to check the label with regards to how much you should use per gallon of water.
-
Asked by Matt from Okc Ok08/23/2017QWhat is the recommended surfactant that can be used with 2DQ Herbicide?
Non-ionic or MSO. Thank YouAEither an MSO or non-ionic surfactant can be used with 2DQ Herbicide. There are no specifications per the manufacturer.
-
Asked by Henry from Mansfield, Tx05/15/2018QWater mix of 2DQ Herbicide?
What is the ratio to water mix?AThe mix rate for 2DQ Herbicide depends on the type of grass you are applying to. Per the product label: Cool-Season Grass: 0.75 - 1.1 oz. per 1 to 5 gallons of water per 1,000 square feetÂ
Warm-Season Grass: 0.37 - 0.55 oz. per 1 to 5 gallons of water per 1,000 square feet -
Asked by Gerald from Vernon Center06/12/2019QCan 2DQ be used on grass hay crop that is fed to livestock?A
2DQ Herbicide is not labeled to be used on hay or areas where animals graze.
-
Asked by Daniel from Mooresville, Nc04/22/2019QDoes 2DQ control creeping woodsorrel in a Bermuda lawn in NC?A
2DQ Herbicide is labeled to control oxalis, and you can use it in established Bermuda turf. There are both pre-emergent and post-emergent herbicides available to use for this weed in a Bermuda lawn.Hi-Yield Weed and Grass Stopper is a popular pre-emergent that controls oxalis/creeping woodsorrel. P…
Read Full Answer »2DQ Herbicide is labeled to control oxalis, and you can use it in established Bermuda turf. There are both pre-emergent and post-emergent herbicides available to use for this weed in a Bermuda lawn.Hi-Yield Weed and Grass Stopper is a popular pre-emergent that controls oxalis/creeping woodsorrel. Please let us know what size lawn you have so we can make more detailed recommendations for you. -
Asked by Linda from Florida10/17/2018QIs 2DQ Herbicide safe to use on horse pastures?A
2DQ Herbicide is not labeled for use in pastures. You can find all of the products we offer that are labeled for pasture use here. Â
-
Asked by Gideon from Easley, Sc03/02/2019Q2DQ vs 3-D
What is the differences in weed control between 2DQ with quinclorac and 3-D with dicamba? This would be used in zoysia lawnAQuali-Pro 3-D Herbicide would provide a faster burn down with the Dicamba than the 2DQ Herbicide.
-
Asked by Christopher from Mi04/17/2021QDoes 2DQ get watered in?A
2DQ Herbicide does not need to be watered in and should not be applied if rain is expected within 4 hours after the application, and your irrigation cycle should be delayed for at least 24 hours after application. Please refer to the product label for complete application instructions, and use as…
Read Full Answer »2DQ Herbicide does not need to be watered in and should not be applied if rain is expected within 4 hours after the application, and your irrigation cycle should be delayed for at least 24 hours after application. Please refer to the product label for complete application instructions, and use as directed. -
Asked by Priscilla from Cody, Wy07/20/2021QIs it safe to graze cattle after applyingA
No, 2DQ Herbicide is not labeled to be used on areas where animals graze. Please be sure to review the product label for more information and complete application instructions.
-
Asked by Carle from Youngsville, Nc09/14/2021Qhow long after I spray Quali-Pro 2DQ Herbicide do I need to wait to over seed my lawn?A
Per the label, reseed no sooner than 3 to 4 weeks after application of 2DQ Herbicide. Failure to observe all precautions may result in injury to turf and/or susceptible plants.