Roundup Dual Action Weed & Grass Killer Plus 4 Month Preventer with Pump N Go 2 Sprayer
Price/Ea.
$49.97
Buy 2 or more: $47.22 each
Have a Question? Ask Our Pros!
Email Our Pros
We're here to help
Offline. Leave Us a Message
You May Also Need
-
Product Overview
Roundup Dual Action Weed & Grass Killer Plus 4 Month Preventer is a herbicide that eliminates existing grass and weeds up to the root while preventing new weed growth for up to four months. It provides visible results in as quick as 6 hours and a complete kill in one to two weeks. It also becomes rainproof in 30 minutes following application. This herbicide comes in a Pump N Go 2 Sprayer which allows 10 minutes of continuous spraying. For best results, this product should be applied during warm, sunny weather above 60 degrees. Ideal for existing weeds and grasses.
-
Details
Active Ingredient Triclopyr, triethylamine salt 0.122% Fluazifop-P butyl 0.097% Diquat dibromide 0.073% Imazapic, ammonium salt 0.015% Target pests Weeds and grasses such as Bermuda grass, Chickweed, St. Augustinegrass, Tall Fescue, and Foxtail. For use in On cracks and crevices in driveways, sidewalks, walkways, patios, along fences, foundations, retaining walls, curbs, mulched beds, and established trees and shrubs. Application Apply in places to kill existing weeds and prevent future weed growth for up to 4 months. To prevent new weeds and grasses from growing, you must spray the entire area you want to control, not just the emerged weeds. See label for more instructions. Pet safe Yes, if used as instructed on the label. Formulation Liquid. Dimensions 13.25 x 19.75 x 13.75 Special Features It can keep new weeds from growing for up to four months. Shipping Weight 14.71 lbs Manufacturer Scotts INSTRUCTIONS FOR ASSEMBLY AND USE
1. CUT. Carefully cut the zip ties securing the hose and pump handle with scissors. Use caution to not cut the white hose.
2. CONNECT. Unwind hose. Firmly push the connector at the end of the hose onto the spout on the pump, until it locks into place.
3. EXTEND WAND. Lift sprayer wand off bottle. Push yellow button while pulling out on the wand nozzle tip. Fully extend want until button snaps into SPRAY POSITION. Note: Trigger will not function until the wand is fully extended and yellow button is visible in the SPRAY POSITION.
4. PUMP. Make sure handle is screwed on tightly or the bottle will not pressurize. Pump container 25-30 times to pressurize bottle. A full bottle requires fewer pumps than an empty bottle. Pumping to the higher range will provide longer spray duration. After pumping, push pump down and turn handle clockwise to lock into carrying position. Note: This bottle is designed to expand under pressure and cannot be over-pressurized.
5. SPRAY. Aim wand. Spray by pushing down trigger with thumb. Adjust spray pattern by rotating nozzle tip to one-half rotation. Spray weeds until thoroughly wet.
6. STORE. When finished spraying, push the yellow button and retract the want until the yellow button snaps back into the original STORAGE POSITION. Place want back onto the top of the bottle in the integrated holster with nozzle tip extended through the eyelet opening.
7. DEPRESSURIZE. Push pump handle all the way down and turn pump handle and cap counter-clockwise to relieve pressure, then retighten to store.
-
Product Documents
-
Customer Reviews
-
Questions & Answers
