Boxwoods, laurels, rhododendrons, azaleas, hollies, Christmas trees and wreaths, and other listed ornamentals
Application
Add Wilt-Pruf to water and apply to foliage. Wilt-Pruf should not be applied in temperatures that would allow the spray to freeze on foliage. See label for complete application instructions.
Pet safe
Yes, if used according to the instructions on the label.
Formulation
Liquid Concentrate
Special Features
All-natural, organic, biodegradable, and non-hazardous.
Spray Wilt-Pruf as long as the spray does not freeze on the foliage while spraying. Allow two or three hours for drying time in daylight (not necessarily sunlight). Wilt-Pruf is a film forming polymer and needs ultraviolet daylight rays in order for the spray to set up or polymerize.
Shake or stir the concentrate container thoroughly before pouring Wilt-Pruf into water.
Wilt-Pruf concentrate MUST be added to water … not water to Wilt-Pruf. Make sure you have a container to pour the water into first.
Mix it well! An electric drill with a mixer attachment can be used to thoroughly stir a container.
Once mixed, Wilt-Pruf may be sprayed with any pressure type pump or power sprayer. The more pressure, the better the spray pattern! Wilt-Pruf cannot be applied with a hose-end sprayer.
Cleaning:
After use, immediately clean spraying equipment with hot water and liquid dish soap and rinse well. Should you mistakenly spray a surface, immediately clean with hot water and liquid dish soap, or use kerosine. Then rinse well. If it doesn’t come off right away, it will wear off with time, as it does on the plants.