DIRECTIONS FOR USE
- Prepare: Measure the treatment area and plan the application at a rate of 3 to 5 lbs. of Reservoir DG per 1,000 sq. ft. of treatment area.
- Apply: Apply Reservoir DG directly to the problematic areas with standard granular fertilizer and/or seed spreaders. APPLY TO DRY TURF ONLY.
- Activate: For best results, apply Reservoir DG prior to a planned irrigation cycle or water-in the treatment within 24 hours of the application.
GENERAL RATE AND APPLICATION GUIDELINES
Reservoir DG can be used as a corrective management tool or as part of a scheduled management program.
Corrective Treatment: 5 lbs./1,000 sq. ft. applied every 4 to 6 weeks until the problem is rectified, then the treatment strategy should transition to a preventative mode for the remainder of the season.
Preventative Management: 3 lbs./1,000 sq. ft. applied to known problematic areas after the first spring mowing and every 4 to 6 weeks through the growing season.
Sodding and/or Seeding: Spread Reservoir DG 3 lbs./1,000 sq. ft. after laying sod or applying grass seed.
GARDEN & LANDSCAPE
Trees and Shrubs: Apply Reservoir DG 3 lbs./1,000 sq. ft. uniformly from drip line to trunk. Repeat on a monthly basis or as needed.
Beds (Flowers, Shrubs): Thoroughly mix 4-5 lbs./cubic yard of backfill. Then continue applications according to instructions noted in Trees and Shrubs section of the label.
ORNAMENTAL USE
Potting Media: Use 4-5 lbs./cubic yard in containerized plantings of ornamental trees, shrubs, plants, flowers, conifers, Christmas trees, and non-bearing fruit and nut trees, and bushes. Thoroughly blend Reservoir DG into potting media before use.
This product is approved for use in the following states:
AK; AL; AZ; CA; CO; CT; DC; DE; FL; GA; HI; IA; ID; IN; KS; KY; LA; MA; MD; ME; MI; MO; MT; NC; ND; NH; NJ; NM; NV; OR; PR; RI; SC; TN; TX; UT; VA; VT; WA; WY
Suggestion For Use:
- For best results, product must be activated with irrigation or rainfall within 24 hours of treatment.
- Avoid mowing and limit traffic on treated areas until wetting is complete.
- Before applying product, calibrate application equipment and test spread pattern to insure consistent and effective coverage.