The Carpenter Bee Control Kit offers a complete solution for treating carpenter bees around your home. Both Demand Duo and Delta Dust start working immediately after application, but they also offer residual protection from new bees entering the area. Using Trebor Plugs to seal up existing holes after you have used your insecticides also helps to Prevent carpenter bee damage in subsequent years. Be sure to Inspect wooden structures thoroughly for carpenter bee nests and bee activity before applying insecticides.

**While carpenter bees are solitary bees and do not attack in groups, it is possible that you can be stung while performing a treatment. If you are sensitive to bee stings or bee stings are intolerable, we recommend that you hire a professional pest control operator to control carpenter bees. If you are not allergic but are worried about bee stings, you may want to consider purchasing and wearing a bee suit.**

How to Apply the Carpenter Bee Kit

STEP 1 - SPRAY - Demand Duo Insecticide

Demand Duo contains two active ingredients to create a unique and long-lasting insecticide treatment in areas where carpenter bees are likely to be active. Demand Duo must be diluted with water only and applied with a sprayer such as a 1 gallon hand pump sprayer.

*Wear gloves when mixing and handling pesticides, such as Nitrile Chemical Resistant Gloves.

*To dilute Demand Duo, first shake the concentrate well. Fill your sprayer tank with 1/3 - 1/2 of the desired volume of water, then add the desired amount of Demand Duo concentrate. Agitate the tank before you finish filling the sprayer with water, then agitate again before your application.

*For initial treatment, use 1 x 1.1 oz dose per gallon of water. For follow up treatments, use 1 x 1.1 oz dose per gallon of water. *Spray again after 21 days as needed while carpenter bees are active.

*Begin spraying areas where carpenter bees have been active the past Spring and/or Fall, spraying prior to new activity or as soon as activity is noticed. Spray wooden areas that are susceptible to carpenter bee infestations including eaves, siding, fascia boards, railings, posts, fencing, and landscape fixtures. You may want to start on areas that receive lots of direct sunlight, at the apex of rooflines, and in areas where there are overhangs.

*Applying a spray band to areas where bees are likely to excavate new nests will help to prevent new damage.

*To reduce the likelihood of stings, treat in the early morning or late evening when bees are less active.

*Spray once a month as needed while carpenter bees are active.

*Demand Duo is versatile, aiding in the control of many common crawling and flying insects, both outdoors and inside. See the product label for complete instructions.

*Keep pets and other people out of the treatment area until the application is dry, usually about an hour.

*Use diluted solution within 24 hours of mixing. Agitate spray solution if your application is interrupted.

*Store Demand Duo concentrate in a temperate area, out of direct sunlight, and out of reach of children or pets.

*To treat areas up to 30 feet high, consider using a Chapin Slide Pump Sprayer to apply Demand Duo Insecticide.

STEP 2 - DUST - Delta Dust and Bellow Hand Duster

Delta Dust is a water-resistant insecticide dust with the powerful active ingredient Deltamethrin, suitable for most common crawling and flying insect pests. Using insecticide dust directly in existing carpenter bee nests gives you the best chances of getting rid of carpenter bees that are already in the area. The formulation of the dry, powdery dust is even more accessible to carpenter bees since the tiny hairs on their bodies will easily pick up the dust. The Bellow Hand Duster has a large capacity as well as a flexible extension tip that makes dusting fast and easy.

*After your spray application has dried, you can apply the insecticide dust.

*Using insecticide dust can be very messy, so be sure to wear gloves such as Nitrile Chemical Resistant Gloves.

*To fill the Bellow Hand Duster, gently unscrew the top to allow space for filling the duster.

*Gently unscrew the top of the Delta Dust, then tap dust into the bulb duster, filling the compartment no more than halfway to allow space for the dust to move inside the duster.

*You may want to add a few small objects such as coins or pebbles to prevent dust from clumping.

*Replace the cap by gently following the threads until the top is fastened securely.

*To apply dust, simply direct the extension tip into the application area, then squeeze the bellow to release the insecticide.

*Before relaxing your grip on the duster, pull it away from the treatment area to prevent sucking up moisture or debris that may clog the duster or cause dust to clump.

*Apply dust directly into existing carpenter bee damage. One puff of dust in each hole is plenty of dust for the bees to pick up a lethal amount of active ingredients.

*Apply dust late in the evening to make sure you are contacting the existing female carpenter bees when they are less likely to sting.

*Dust applications also help to eliminate the immature stage of the developing carpenter bee, reducing future populations.

*Dust applications generally only need to be made once per season.

*Store dust and duster in a dry, temperate area out of reach of children and pets.

STEP 3 - SEAL DAMAGE - Trebor plugs

*Wait at least 14 days after spraying and dusting before sealing up existing holes. This allows time for the female bees to return to the nest, come into contact with the application, and spread the dust throughout the nest.

*Plugging holes too quickly can result in bees creating new routes into the nest before coming into contact with the insecticides, resulting in more damage.

*The included Trebor plugs fit perfectly into existing carpenter bee holes so that bees do not return to the same site the following year.

*Holes also can be sealed with wood patch or similar materials.